Web Analytics Made Easy - StatCounter

Paver Finisher Repair Tenders

Get complete information related to latest Paver Finisher Repair Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Paver Finisher Repair Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Paver Finisher Repair Tenders .

Filter
Loading....
Loading....
Loading....
Loading....
Loading....

Bid Submission Date Range
Tender Value

CTN :45720703 Due date: 30 Jul, 202630 Jul, 2026 2.00 Crore
Tender For inviting rates of different items for construction of diffrent type of work as per demand on cm help line or ward parsad or public - supply of handpump material 2026-27, excavation for roadwork in soil with hydraulic excavator including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location with all lifts and lead up to 1000 m as per section-300 of the specifications.item no nvi-3.12, construction of embankment/sub-grade/earthen shoulders with material obtained from other sources, as per provisions of section 305 of the specifications, with approved materials/soil confirming to requirements given in table 301-1 of specifications including all lead and lifts, including cost of watering, compaction by vibratory roller/heavy pneumatic type roller etc. confirming to requirements given in table 301 2 of the specifications complete.item no nvi-3.12, construction of granular sub-base, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method at omc and compacting with vibratory roller of 80-100 kn static weight to achieve the desired density, including all lifts and lead complete in all respect as per section-400 of the specifications.by mix in place method item no nvi -4.1.1.1, construction of dry lean cement concrete sub- base over a prepared sub-grade with coarse and fine aggregate conforming to is: 383, the size of coarse aggregate not exceeding 26.5mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1 of the specifications, cement content not to be less than 150 kg/cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 mpa at 7 days, mixed in a batching plant, transported to site, laid with paver with electronic sensor/mechanical paver, compacting with 8-10 tonnes vibratory roller, finishing and curing and as per section 601 of specifications.item no nvi- 6.1.1, providing and laying cement concrete grade m-20 with 20 mm graded crushed stone aggregate, mixing shall be in mechanical mixer, laying with paver compacting by use of pin, plate / screed vibrators including form work by strong steel girders fixed by spikes, separation membrane 125 micron thick, including cutting of joints @ 4 to 5 m interval and filling it with hot applied bituminous sealant (without dowel bars) (max. thickness 20 cm).item no nvi-6.4, construction of dowel jointed, plain cement concrete pavement in m-30 grade concrete over a prepared sub base with 43 or higher grade cement, coarse and fine aggregate conforming to is:383 maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or slip form paver with electronic sensor spreading the concrete by shovels, rakes compacted using needle, screed and plate vibrator and finished in a continuous operation including provision of contraction, expansion, and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, placing of dowel bar, tie rod admixtures as approved, curing compound, finishing to lines and grades as per approved drawings as per irc:15 and as per section-602 of the specifications complete excluding cost of steel in dowel bar and tie rod etc.item no nvi-6.2.1, earth work in excavation for foundation, trenches for pipes / cables or drains etc. by mechanical means / manual means (exceeding 30cm in depth.) including ramming of bottom,dressing of sides,disposal of excavated earth including of all lift and lead upto 50m.disposed earth to be levelled and neatly dressed.all kinds of soil item no nii 2.6.1, demolishing cement concrete manually/by mechanical means including disposal of material with in 50 meters lead as per direction of engineer-in-charge.1:3:6 or richer mixitem no nii

State Government

CTN :45705845 Due date: 30 Jun, 202630 Jun, 2026 NA
Tender For cc interlocking paver blocks providing and laying 80mm thick factory made cement concrete interlocking paver block of m -35 grade made by block making machine with strong vibratory compaction, of approved size, design and shape, laid in required colour and pattern over (bis 15658:2006) and including 60mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of engineer-in-charge. , maintenance of roads removal of existing ipb by manual means and disposal of dismantled material with all lead and lift as per technical specification clause 202.3. ,maintenance of roads relaying of available (removed and stacked) interlocking paver block pavement having thickness 100mm/80 mm/ 60 mm (average = 80mm) as per drawings and technical specification clause 1504 , excavating trenches of required width and depth for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m. 1.2. all kind of soil pipes, cables etc, exceeding 80 mm dia but not exceeding 300 mm dia ,demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer - in - charge. 1. nominal concrete 1:1.5:3 or richer mix (i/c equivalent design mix) cement concrete (cast in situ) providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work below plinth level and up to floor iv level: 6. 1:4:8 (1 cement : 4 coarse sand (zone-iii) : 8 graded stone aggregate 40 mm nominal size)

State Government

CTN :45705899 Due date: 30 Jun, 202630 Jun, 2026 NA
Tender For cc interlocking paver blocks providing and laying 80mm thick factory made cement concrete interlocking paver block of m -35 grade made by block making machine with strong vibratory compaction, of approved size, design and shape, laid in required colour and pattern over (bis 15658:2006) and including 60mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of engineer-in-charge., maintenance of roads removal of existing ipb by manual means and disposal of dismantled material with all lead and lift as per technical specification clause 202.3. ,b laying of ac / pvc pipes and specials stringing out a.c./p.v.c pipes and specials casting along trenches and laying the same in trenches, to correct alignment and gradients including cartage from divisional stores or nearest railway station to site of works and return of pieces of pipes to stores. 3. 100 mm internal diameter of pipe line laid complete,earth work in excavation by mechanical means (hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead up to 50 m and lift up to 1.5 m, as directed by engineer-in-charge. 1. all kinds of soi

State Government

CTN :45704964 Due date: 30 Jun, 202630 Jun, 2026 NA
Tender For cc interlocking paver blocks providing and laying 100mm thick factory made cement concrete interlocking paver block of m -35 grade made by block making machine with strong vibratory compaction, of approved size, design and shape, laid in required colour and pattern over (bis 15658:2006) and including 60mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of engineer-in-charge. ,providing, lowering, laying in trenches, aligning, fixing in position and jointing ductile iron (di) isi marked k-7 grade sands pipes as per is:8329-2000 (amended up to date), with internal cement mortar lining for potable water with rubber ring (epdm/sbr) joints as per is: 5382-1985 (excluding special accessories) complete including all material, labour, hydraulic testing and commissioning as per technical specifications and as per direction of engineer. , earth work in excavation by mechanical means (hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. 1. all kinds of soil. ,demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer - in - charge. 2. nominal concrete 1:2:4 or leaner mix (i/c equivalent design mix) , providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work below plinth level and up to floor iv level: 2. 1:2:4 (1 cement : 2 coarse sand (zone-iii) : 4 graded stone aggregate 20 mm nominal size)

Central Government/Public Sector

CTN :45365796 Due date: 04 Jul, 202604 Jul, 2026 11.50 Lacs
Tender For corrigendum : repair resurfacing of certain roads and connected items at bd bari mil stn - m&l preparing black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with wire brush/brooms and finally fanning the cleaned surface with gunny bags or by mechanical blower to remove all loose dirt etc to black top surfaces, and applying evenly a priming/tack (viscosity grade paving bitumen of grade vg-10) @ 5 kg per 10 sqm to road surface bituminous asphaltic semi dense concrete consolidated thickness 30 mm with stone chippings graded aggregate with 5.5% of binder content by weight of total mix, (viscosity grade paving bitumen of grade vg-30) and 4% stone dust conforming to required specification for filler as per irc-95, 1987 (filler) by weight of mix, prepared in hot mix plant, rolled and compacted to required camber and gradient to uniform smooth surfaces by mechanical paver and rolled with 8 to 10 tone power roller completed all as specified and as directed., m&l for repair to potholes, any depth ,not exceeding 1 sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in roads, path etc, cutting around edges to at least 25mm in depth, making good by filling in screened and graded road metal, watering and well ramming, applying tack coat with (viscosity grade paving bitumen of grade vg-10) @ 10.0 kg per 10 sqm of surface putting in & including premixed bituminous macadam, well rammed and sealed with binder 9.80 kg/sqm, blinded with 0.09 cum of stone chippings, 6.3mm size and again well rammed, rolled and compacted to required camber and gradient to uniform smooth surfaces by mechanical paver and using with 8 to 12 tonne power roller (including supply of premixed macadam, binder and chippings),completed all as specified and as directed., premix bituminous macadam laid / rolled and compacted using 8 to 12 tonne power roller to required gradient and camber, with broken stone graded aggregate with 4% of paving bitumen binder of viscosity grade vg-30 grade by weight of toal mix (consolidated thickness 75mm or less) completed all as specified and as directed., m&l providing and laying at or near ground level factory made kerb stone of m-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required completed all as specified and as directed., m&l for marking lines 2.5 mm thick, dashes arrows etc of any description n. exc 10cm width/girth on road surface using hot applied thermo plastic road marking paint of approved colour confirming to bs-3262-1989 with special applicator machine all as per manufacturere instruction completed all as specified and as directed., supply and fix solar cat eye (green/red) aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency mono rystafie solar panel 2.4v/ 0.3 watt one ni-ed rechargeable battery (1.2v/ 1600ma) consisting of super bright led with 10,000 to 18,000 mcd completed as per manufactures instructions etc completed all as specified and as directed., supply and fixing metal tubular dealineator made out of abs round body fitted with 2 nos 65 mm dia highly reflective reflectors made out of and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in pcc 1:2:4 (150x150x300mm) type b1 complete all as specified and directed, s&f manufacturing, supplying and fixing retro reflective mandatory/ regulatory sign boards of 900 mm diametre with support length of 3750 mm and made up of 2 mm thick aluminium sheet, face to be fu

State Government

CTN :45705123 Due date: 30 Jun, 202630 Jun, 2026 NA
Tender For cc interlocking paver blocks providing and laying 100mm thick factory made cement concrete interlocking paver block of m -35 grade made by block making machine with strong vibratory compaction, of approved size, design and shape, laid in required colour and pattern over (bis 15658:2006) and including 60mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of engineer-in-charge. , fixing bell mouths bailing out water from the trenches for making new connections in fully charged pipe-lines including cleaning trimming and dressing the trenches to correct alignment and grade as required by the engineer-in-charge. size of the main with which connection is to be made. 1. up to 200 mm internal diametre ,filter media providing and fixing cast iron detachable joints class-15 marked with is: 8794 for use with asbestos cement pressure pipes complete with 2 nos. rubber rings marked with is:5382 and is:10292 and appropriate number of nut and bolts marked with is:1363 including carriage, loading, unloading etc. complete in all respects to the satisfaction of the engineer-in-charge. (excavation will be paid separately) 2. 100mm i/d cid joint, earth work in excavation by mechanical means (hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. 1. all kinds of soil.,demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer - in - charge. 2. nominal concrete 1:2:4 or leaner mix (i/c equivalent design mix) , cement concrete (cast in situ) providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work below plinth level and up to floor iv level: 2. 1:2:4 (1 cement : 2 coarse sand (zone-iii) : 4 graded stone aggregate 20 mm nominal size) ,cement concrete (cast in situ) providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work below plinth level and up to floor iv level: 6. 1:4:8 (1 cement : 4 coarse sand (zone-iii) : 8 graded stone aggregate 40 mm nominal size),rain water spouts and pipes providing and fixing on wall face unplasticised rigid pvc rain water pipes conforming to is : 13592 type a, including jointing with seal ring conforming to is : 5382, leaving 10 mm gap for thermal expansion, (i) single socketed pipes. 2. 110 mm diameter

State Government

CTN :45705319 Due date: 30 Jun, 202630 Jun, 2026 NA
Tender For cc interlocking paver blocks providing and laying 100mm thick factory made cement concrete interlocking paver block of m -35 grade made by block making machine with strong vibratory compaction, of approved size, design and shape, laid in required colour and pattern over (bis 15658:2006) and including 60mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of engineer-in-charge. , fixing bell mouths bailing out water from the trenches for making new connections in fully charged pipe-lines including cleaning trimming and dressing the trenches to correct alignment and grade as required by the engineer-in-charge. size of the main with which connection is to be made. 1. up to 200 mm internal diametre ,filter media providing and fixing cast iron detachable joints class-15 marked with is: 8794 for use with asbestos cement pressure pipes complete with 2 nos. rubber rings marked with is:5382 and is:10292 and appropriate number of nut and bolts marked with is:1363 including carriage, loading, unloading etc. complete in all respects to the satisfaction of the engineer-in-charge. (excavation will be paid separately) 2. 100mm i/d cid joint, earth work in excavation by mechanical means (hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. 1. all kinds of soil.,demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer - in - charge. 2. nominal concrete 1:2:4 or leaner mix (i/c equivalent design mix) , cement concrete (cast in situ) providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work below plinth level and up to floor iv level: 2. 1:2:4 (1 cement : 2 coarse sand (zone-iii) : 4 graded stone aggregate 20 mm nominal size) ,cement concrete (cast in situ) providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work below plinth level and up to floor iv level: 6. 1:4:8 (1 cement : 4 coarse sand (zone-iii) : 8 graded stone aggregate 40 mm nominal size),rain water spouts and pipes providing and fixing on wall face unplasticised rigid pvc rain water pipes conforming to is : 13592 type a, including jointing with seal ring conforming to is : 5382, leaving 10 mm gap for thermal expansion, (i) single socketed pipes. 2. 110 mm diameter

Central Government / Public Sector

CTN :45684251 Due date: 02 Jul, 202602 Jul, 2026 1.23 Crore
Tender For construction of sales building, paver driveway, and other allied civil, mechanical and electrical works at kulpi filling enterprise, paschim srinagar, ps-ramkrishnapur, dist- south 24 parganas under kolkata do of wbso

State Government

CTN :45696572 Due date: 01 Jul, 202601 Jul, 2026 NA
Tender For supply of item rate for construction materials for all types of construction works under mgnrega - hire charges of coaltar boiler 900 to 1400 litres, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, hire charges of diesel road roller- 8 to 10 tonne, production cost of concrete by batch mix plant, hire charges of diesel truck-9 tonne, hire charges of sparaying machine including electric charges, hire charges of coaltar sprayer, hire charges of barber green, drying,mixing and asphalt plant, with accessories, capacity 30/45 tonne, pumping charges of concrete including hire charges of pump, piping work & accessories etc., hire charges of derrick monkey rope, hire charges of pump set of capacity 4000 litres/hour, vibrator (needle type 40 mm), machine for rubbing of floors, front end loader capacity 1.00 cum, hire and running charges of tripod and mechanical winch machine complete with power unit and accessories, mastic cooker, hire and running charges of tipper, hire and running charges of loader, hand grinder for mirror polish, hydraulic excavator (3d) with driver and fuel, pin vibrator, surface vibrator, hot bitumen mixer 0.5cum i/c hand cart, hire and running charges of hydraulic piling with power unit etc. including complete accessories and shifting at site, hire and running charges of light crane, hire and running charges of bentonite pump, hire and running charges of vibrating pile driving hammer complete with power unit and accessories, hire and running charges of crane 20 tonne capacity, carriage of concrete by transit mixer, generator 250 kva, paint applicator, mobile crane, tractor with ripper attachment, tractor with trolley, air compressor 250 cm with two leads for pneumatic cutters/hammers, joint cutting machine with 2-3 blades, c.c.batch mix plant, road sweeper, slip form paver with sensor, water tanker 5000 ltr. capacity, concrete joint cutting machine, texturing machine, dozer d-80-a12, motor grade 3.35 meter blade, hydraulic excavator of 1 cum bucker, front end loader 1 cum bucket capacity (incl pol), tipper -5 cum, vibratory roller 8 to 10 tonne, smooth wheeled roller 8 to 10 tonne, tandem road roller, water tanker 5 to 6 kl capacity, air compressor, wet mix plant 60 tph, mechanical broom hydraulic, emulsion pressure distributor @1750 sqm per hour, hot mix plant - 120 tph capacity, hot mix plant 100 tph capacity, paver finisher hydrostatic with sensor control 100 tph, paver finisher mechanical 100 tph, batching and mixing plant @75 cum per hour, concrete paver finisher with 40 hp motor and sensor, generator 250 kva, generator 100 kva/125, truck 5.5 cum/ 10 tonnes, road sweeper (mechamical broom) @ 1250 sqm per hour, drum type hmp of 60-90 tph capacity @ 75 tonne per hour actual output, hire and running charges of drill machine up to 400 mm dia (including cost of mobile oil, disesel consumption in ordinary soil operator), pile integrity testing equipment, excavation of diaphragm wall by mechanical grab, hire charges of tata 407 or equivalent for local shifting, hire charges of diesel truck - 9 tonne (without pol), using cost of ultra voilet radiation tube, compressor, gun, rubber pipes & other accessories - hire charge of plant & machinery i/c necessary fuel, hire charges of suction jeting machine 2200 psi machine i/c pol and operator, hire charges of drill machine upto 30 mm dia, hire charges of sand blasting equipment, hire charges of compressor, welding charges of shear key to existing reinforcement, hire charges of plant and machinery that can inject 350 kg/day, seam bolts and nuts 6 mm dia and 25 mm long, fibre (high impact poly propelene reinforced) cement corrugated sheet 6 mm thick, fibre (high impact poly propelene reinforced) cement close fitting adjustable ridge, fibre (high impact poly propelene reinforced) cement corrugate serrated adjustable ridge, fibre (high impact poly propelene reinforced) cement plain wing adjustable ridge, fibre (high impact poly propelene reinforced) cem

State Government

CTN :45621543 Due date: 29 Jun, 202629 Jun, 2026 2.73 Lacs
Tender For mp-lads-angamaly bp-mp lads 2024-25 honble mp sr. p.p.suneer ( rajyasabha) construction of open gym and installation of equipment at chakkala pongam area of ward -13, thuravoor grama panchayat (infrastructure & purchasc) ernakulam district-general civil work - platform for open gym, 2.32:clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared., 2.8.1:earth work in excavation by mechanical means (hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.all kinds of soil, 4.1.8:providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level:1:4:8 (1 cement : 4 coarse sand (zone-iii) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources), 4.3.1:centering and shuttering including strutting, propping etc. and removal of form work for:foundations, footings, bases for columns, 4.1.3:providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-iii)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources), od228316/2023-2024:construction of granular sub-base by providing local material, spreading in uniform layers on prepared surface and compacting by ramming to achieve the desired density complete i) using gravel mix/quarry muck, od223449/2023-2024:providing and laying factory made chamfered edge cement concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength,thickness & size/ shape, made by table vibratory method using pu mould, laid in required colour & pattern over 50mm thick compacted bed of stone aggregate, compacting and proper embedding/laying of inter locking paver blocks into the stone aggregate bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of engineer-in-charge.60mm thick cement concrete paver block of m-35 grade with approved colour, design & pattern. modified spec. 16.91.1, od134330/2025-2026:providing and fixing gi pipe hand rail of approved size by welding and all labour charges etc., 5.23:smooth finishing of the exposed surface of rcc work with 6mm thick cement mortar 1:3 ( cement : 3 fine sand)., 13.52.2:finishing with epoxy paint (two or more coats) at all locations prepared and applied as per manufacturers specifications including appropriate priming coat, preparation of surface, etc. complete.on concrete work, 13.52.1:finishing with epoxy paint (two or more coats) at all locations prepared and applied as per manufacturers specifications including appropriate priming coat, preparation of surface, etc. complete.on steel work, od133367/2025-2026:supplying and fixing white stone bench with back rest,2 seater, od139386/2025-2026:providing and laying of interlocking concrete block pavements using80 mm m 40 interlocking paver blocks made by strong vibratory compaction of approvedsize,design @ shape ,laid in required pattern over and including a compacted bed of 6 mm stoneaggregate of 50 mm average thickness etc all complete as per the direction of engineer incharge., od234555/2023-2024:supplying and fixing in place granite name board of slab area less than 0.9sqm includingengraving and painting letters etc complete as per direction of engineer in charge at sitedar spec
 Loading, Please wait...

Connect us via What's Up